DPP-260 Capsule / Tablet Full automatic Blister Packing Machine For Foods
DPP-260 Capsule / Tablet Full automatic Blister Packing Machine For Foods Main function
Mechanism forming, special automatic feeding, sealing, perforation, embossing and blister cutting. Suitable Alu/PVC,PVDC & Alu/Alu blister packing for tablets, capsules, soft gels, etc.
DPP-260 Capsule / Tablet Full automatic Blister Packing Machine For Foods Characteristic:
1, DPP260 Blister Packing Machine could fission pack to enter lift and division cleaning workshop, adopt column pin location, bolt-fixation, easy to serial production.
2, The die locate day location pin with precision, and press-board dress up.
3, Main motor adopt frequency control: (punch frequency is 60 times/min). It can enact corresponding punch frequency according to travel and fulled feeding easy or hard factor.
4, Adopt engine-hand nip draw station, running steadily, synchronization nicety, change travel and design the plate size at will on the range of 40-120mm.
5, Forming and heating plate close and open automatically, it could protract time to boot-strap after put down heating plate, limit wasting material less than one edition.
6, Air bed sealing, net-plate is hoisted by cylinder while stop. Avoid making blister metamorphose by heat radialization while settling, easy to clean the net-plate also, at the same time,play the role of buffer when over-pressure, is propitious to prolong machine usage life.
7, Up-lower net-plate male and female work in heat-sealing, there are punctuate net-veins on the positive and negative(could line-pressurize also). Because two side stress are equality, make plate more level-up, improve pressurize capability as well.
8, Alarm and stop while PVC is out and discerption, easy to replace and add PVC on time for work man.
9, All hardware and container are contact with medicament, adopt stainless steel and innocuity produce, accord with “GMP” request.
Main Technical Parameter
| Item | Data |
| Packing material | PVC: (0.25*260)mm ALU for sealing: (0.02*260)mm Alu for forming: (0.15*260)mm |
| Cutting speed | ALU/ALU: 20-40 times/min ALU/PVC: 20-60 times/min |
| Range of working travel | 30-120mm |
| Max forming area | 260*115mm |
| Max forming depth | ALU/ALU: 10 mm ALU/PVC: 18 mm |
| Motor power | 1.5 kw |
| Main source power | 9.5 kw |
| Power supply | 380V/50HZ |
| Air pump | Volume flux: ≥0.4m3/min Rating exhaust pressure:≥ 0.5Mpa |
Remarks:
* Best option for small batches, pharmaceutical R&D and pilot plants.
* It allows forming thermoplastic and cold forming materials (Alu-Alu).
* It stands out for its simple operation, high reliability and compact design. Its main structure is made of stainless steel.
* Automation by PLC and operation through touch screen control panel.
* It has pneumatic drives, which lend it high robustness and low maintenance.
* It is suggested for R&D departments, considering that its easy operation and maintenance makes it user-friendly to personnel that are not familiar with the use of blister machines.
Blister package sample
Workshop part
Product Tags:
|
|
DPP 260 Capsule Tablet Full Automatic Blister Packing Machine For Foods Images
|
